Third Row
REMOVAL
To avoid serious or fatal injury during and following any seat belt or child restraint anchor service, carefully inspect all seat belts, buckles, mounting hardware, retractors, tether straps, and anchors for proper installation, operation, or damage. Replace any belt that is cut, frayed, or torn. Straighten any belt that is twisted. Tighten any loose fasteners. Replace any belt that has a damaged or ineffective buckle or retractor. Replace any belt that has a bent or damaged latch plate or anchor plate. Replace any child restraint anchor or the unit to which the anchor is integral that has been bent or damaged. Never attempt to repair a seat belt or child restraint component. Always replace damaged or ineffective seat belt and child restraint components with the correct, new and unused replacement parts listed in the Mopar® Parts Catalog. Failure to follow these instructions may result in possible serious or fatal injury.
| 1 - Bolt |
| 2 - Buckle Assembly |
- Remove the bolt from the buckle anchor.
- Remove the third row buckle assembly from the vehicle.
INSTALLATION
- Position the buckle for installation.
- Install the third row seat belt buckle assembly bolt and tighten to the proper specification. Refer to TORQUE SPECIFICATIONS .