Integrated Center Stack (Ics)

REMOVAL 

1. Remove the instrument panel center bezel. Refer to BEZEL, INSTRUMENT PANEL, CENTER, REMOVAL AND INSTALLATION .

   Courtesy of CHRYSLER GROUP, LLC

   1 - Integrated Center Stack (ICS)

   2 - Bezel

2. Working from the backside of the instrument panel center bezel (2), compress the retaining clips on the Integrated Center Stack (ICS) (1).
3. Carefully push on the rear of the ICS, and remove the ICS from the bezel.

INSTALLATION 

1. Position the ICS into the instrument panel center bezel. Press together firmly to fully seat retaining clips.
2. Install the instrument panel center bezel. Refer to BEZEL, INSTRUMENT PANEL, CENTER, REMOVAL AND INSTALLATION .