Global Telematics Box Module (TBM2)

REMOVAL 

1. Remove the glove box door. Refer to DOOR, GLOVE BOX, REMOVAL AND INSTALLATION .

   Courtesy of CHRYSLER GROUP, LLC

   1 - Fasteners

   2 - Antenna and Wire Harness Connectors

   3 - Global Telematics Box Module (TBM2)

2. Through the glove box opening, disconnect the antenna and wire harness connectors from the Global Telematics Box Module (TBM2).
3. Remove the fasteners (1) from the TBM2 (3) and remove the TBM2 through the glove box opening.

INSTALLATION 

1. Position the TBM2 through the glove box opening to the instrument panel carrier.
2. Install the fasteners the retain the TBM2 and tighten them securely.
3. Connect the antennas and wire harness connectors.
4. Install the glove box door. Refer to DOOR, GLOVE BOX, REMOVAL AND INSTALLATION .