Base Brake Bleeding: Notes

WARNING: This page is about a different car, the 2022 Chrysler Voyager and 2022 Chrysler Pacifica. However, it is still accessible from the selected car via links, so may be relevant.

CAUTION:

Before removing the master cylinder reservoir cap, thoroughly clean the cap and master cylinder fluid reservoir to prevent dirt and other foreign matter from dropping into the master cylinder fluid reservoir.

NOTE:

NOTE: The following wheel sequence should be used when bleeding the brake hydraulic system. The use of this wheel sequence will ensure adequate removal of all trapped air from the brake hydraulic system.

Left Rear Wheel
Right Front Wheel
Right Rear Wheel
Left Front Wheel

NOTE:

When bleeding the brake system, some air may be trapped in the brake lines far upstream, as much as ten feet from the bleeder screw. Therefore, it is essential to have a fast flow of a large volume of brake fluid when bleeding the brakes to ensure all the air gets out.

Pressure bleeding the brakes is recommended.

The fluid fill level is indicated on the side of the master cylinder reservoir.

The correct fluid level is to the MAX indicator on the side of the reservoir. If necessary, add fluid to the proper level.