Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Jeep >> 2021 >> Gladiator Mojave, Part Time T/Case Control, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 2 (Front Suspension & Wheel Alignment) >> Front >> Technical Specifications >> Torque Specifications

Torque Specifications

WARNING: This page is about a different car, the 2022 Chrysler Voyager and 2022 Chrysler Pacifica. However, it is still accessible from the selected car via links, so may be relevant.
TORQUE SPECIFICATIONS

DESCRIPTION N.m Ft. Lbs. In. Lbs. COMMENT
Ball Joint Stud Pinch Fastener 115 85 - Do not reuse fastener. If removed, a new fastener must be installed and tightened to specifications. 
Ball Joint Stud Pinch Fastener (With Recall Washer on Bolt) 110 81 - Do not reuse fastener. If removed, a new fastener must be installed and tightened to specifications. 
Crossmember Fasteners 100 74 -  
Hub and Bearing Mounting Fasteners (FWD) 57 42 - Do not reuse fastener. If removed, a new fastener must be installed and tightened to specifications. 
Hub and Bearing Mounting Fasteners (AWD) 125 92 - Do not reuse fastener. If removed, a new fastener must be installed and tightened to specifications. 
Lower Control Arm to Front Body Mounting Fastener 160 118 -  
Front Lower Control Arm to Front Subframe Mounting Fasteners 270 199 - Do not reuse fastener. If removed, a new fastener must be installed and tightened to specifications. 
Front Lower Control Arm to Rear Subframe Mounting Fasteners 105 77 - Do not reuse fastener. If removed, a new fastener must be installed and tightened to specifications. 
Shear Bracket Fastener One 169 125 - Do not reuse fastener. If removed, a new fastener must be installed and tightened to specifications. 
Shear Bracket Fastener Two 50 37 - Do not reuse fastener. If removed, a new fastener must be installed and tightened to specifications. 
Shear Bracket Fastener Three 160 118 - Do not reuse fastener. If removed, a new fastener must be installed and tightened to specifications. 
Stabilizer Bar Bracket Fasteners (AWD) 86 63 -  
Stabilizer Bar Bracket Fasteners 83 60 -  
Stabilizer Bar Link Mounting Fasteners 101 74 -  
Strut Clevis-to-Knuckle Fasteners (Built Before Jan 12, 2018) 202 149 -  
Strut Clevis-to-Knuckle Fasteners (Built On Or After Jan 12, 2018) 132 97 -  
Strut Rod Fastener 93 69 -  
Strut Upper Mount Plate Fasteners 23 17 -