Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Jeep >> 2021 >> Gladiator Mojave, Part Time T/Case Control, Automatic Trans >> Repair and Diagnosis >> Electrical >> Body Electrical >> Power Distribution >> Outlet, Power >> Removal And Installation >> Removal And Installation-Front Power Outlet >> Removal

Removal And Installation-Front Power Outlet: Removal

  1. Disconnect and isolate the negative battery cable(s). Refer to the appropriate service information .
    NOTE:

    Record the position of the retaining bosses inside power outlet.

    GC0182997Courtesy of CHRYSLER GROUP, LLC
  2. Insert Remover, Power Outlet (special tool #10246A, Remover, Power Outlet) into the retaining bosses of the power outlet.
  3. Pull out the base through the mounting ring by gently rocking the tool.
  4. Disconnect the wire harness connector from the power outlet.
  5. Set the base aside and remove the base mount ring.
scientia non olet · About Mike's Workshop Manuals