Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Jeep >> 2021 >> Compass Trailhawk >> Repair and Diagnosis >> Body & Frame >> Seats >> Power Seats (Service Information) >> Switch, Seat, Power >> Removal And Installation >> Installation

Removal And Installation: Installation

  1. Install the power seat switch into the seat side shield.
  2. Connect the wire harness connectors to the switches.
  3. Install the seat side shield. Make sure the retainer clips are fully engaged with the seat.
  4. Install and securely tighten the screw for the seat side shield.
  5. Connect the negative battery cable. If equipped with an Intelligent Battery Sensor (IBS), connect the IBS connector.
scientia non olet · About Mike's Workshop Manuals