Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Jeep >> 2021 >> Cherokee High Altitude, Automatic T/Case Control >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 3 (3.2L Engine (Service Information)) >> Lubrication >> Sensor, Oil Temperature >> Installation

Sensor, Oil Temperature: Installation

WARNING: This page is about a different variant/trim than selected.
GC0162119Courtesy of CHRYSLER GROUP, LLC
  1. Install the oil temperature sensor (1) and tighten to the proper torque specification. Refer to (TORQUE SPECIFICATIONS ).
  2. Connect the oil temperature sensor wire harness connector (2).
  3. Install the upper and lower intake manifolds. Refer to MANIFOLD, INTAKE, INSTALLATION .
scientia non olet · About Mike's Workshop Manuals