Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Jeep >> 2021 >> Cherokee High Altitude, Automatic T/Case Control >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 2 (2.4L & 3.2L Cooling System) >> Engine >> Sensor, Coolant Temperature >> Installation >> 3.2L

Sensor, Coolant Temperature: Installation: 3.2L

WARNING: This page is about a different variant/trim than selected.
GC0169778Courtesy of CHRYSLER GROUP, LLC
  1. Install the coolant temperature sensor (2) and tighten to the proper torque specification. Refer to (TECHNICAL SPECIFICATIONS  ).
  2. Connect the coolant temperature sensor wire harness connector (1).
  3. Fill the cooling system. Refer to COOLANT SYSTEM AIR EVACUATION  .
  4. Install the engine cover.
  5. Connect the negative battery cable. If equipped with an Intelligent Battery Sensor (IBS), connect the IBS connector.
scientia non olet · About Mike's Workshop Manuals