Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Jeep >> 2021 >> Cherokee High Altitude, Automatic T/Case Control >> Repair and Diagnosis >> Brakes >> Traction Control >> Antilock Brake System (Abs) (Service Information) >> Electrical >> Sensor, Wheel Speed, Front >> Removal

Sensor, Wheel Speed, Front: Removal

NOTE:

Before proceeding. Refer to CAUTION or WARNING .

  1. Disconnect and isolate the negative battery cable. If equipped with an Intelligent Battery Sensor (IBS), disconnect the IBS connector first before disconnecting the negative battery cable.
  2. Raise and support the vehicle. Refer to HOISTING, STANDARD PROCEDURE .
    GC0187161Courtesy of CHRYSLER GROUP, LLC
  3. Disconnect the wheel speed sensor wire harness connector.
  4. Separate sensor harness clips from retainers (1, 2).
  5. Separate the wheel speed sensor harness from the strut bracket (3).
  6. Remove the mounting bolt (5) fastening the wheel speed sensor head (4) to the knuckle. Pull the sensor head (4) out of the knuckle and remove the wheel speed cable from the vehicle.
scientia non olet · About Mike's Workshop Manuals