Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Jeep >> 2020 >> Grand Cherokee Trackhawk >> Repair and Diagnosis >> External Pages >> Different car >> Section 324 (Electronic Control Modules (Service Information)) >> Module, Comfort Seat And Wheel (CSWM) >> Removal

Module, Comfort Seat And Wheel (CSWM): Removal

WARNING: This page is about a different car, the 2019 Jeep Grand Cherokee. However, it is still accessible from the selected car via links, so may be relevant.
GC0145750Courtesy of CHRYSLER GROUP, LLC
  1. Disconnect and isolate the negative battery cable.
  2. Remove the fasteners that secure the front passenger seat to the body and tip the seat rearward to gain access to the underneath of the seat. Refer to SEAT, FRONT, REMOVAL .
  3. Remove the two bolts (1) that secure the bracket (2) containing the Comfort Seat and Wheel Module (CSWM) (3) to the underside of the seat cushion frame (4).
  4. Disengage the metal bracket retaining tab (5) from the underside of the seat cushion frame.
    GC0145751Courtesy of CHRYSLER GROUP, LLC
  5. Disconnect the electrical connectors (1, 2 and 5) from the (CSWM) (4).
  6. Disengage the retaining tab (3) from the bracket (7).
  7. Tip the inboard end of the CSWM upward to disengage the two retaining tabs (6) from the bracket and remove the CSWM.
scientia non olet · About Mike's Workshop Manuals