Mike's Workshop Manuals
: Service manuals for every vehicle
Home
>>
Jeep
>>
2020
>>
Gladiator Rubicon, Automatic Trans
>>
Repair and Diagnosis
>>
Accessories & Equipment
>>
Communication Devices
>>
(Drivetrain Control Module (DTCM) - Electrical Diagnostics)
>>
DTC Troubleshooting
>>
C1463-13 - Front Axle Disconnect Control-Circuit Open
>>
Set Condition
Set Condition
Voltage on the (G304) Front Axle Lock Control circuit is between 2.8 and 5.0 volts for 1 ms while this control driver is commanded off.