Mike's Workshop Manuals
: Service manuals for every vehicle
Home
>>
Jeep
>>
2020
>>
Gladiator Altitude, Automatic Trans
>>
Repair and Diagnosis
>>
Engine Performance
>>
System
>>
3.6L - DTCS B1810 To P0032
>>
DTC Troubleshooting
>>
B23C0-Stop/Start Disable Switch 2 Circuit Performance
>>
Set Condition
Set Condition
The Powertrain Control Module (PCM) receives the Stop/Start Disable Switch voltage input over CAN Bus from the Integrated Center Stack (ICS) Switch Bank Module. The PCM detects that the Stop/Start Disable Switch 2 input is irrational.