Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Jeep >> 2019 >> Wrangler Unlimited Moab >> Repair and Diagnosis >> Accessories & Equipment >> Drivers Assistance Systems - ADAS >> Electronic Control Modules (Service Information) >> Module, Keyless Ignition Node (Kin) >> Removal And Installation >> Installation

Removal And Installation: Installation

  1. Position the KIN for installation.
  2. Install the fasteners for the KIN and tighten securely.
  3. Connect the KIN wire harness connector.
  4. Install the Integrated Center Stack (ICS) module. Refer to MODULE, INTEGRATED CENTER STACK (ICSM), REMOVAL AND INSTALLATION .
  5. Connect the negative battery cable(s). Refer to STANDARD PROCEDURE .
scientia non olet · About Mike's Workshop Manuals