Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Jeep >> 2019 >> Wrangler Unlimited Moab >> Repair and Diagnosis >> Accessories & Equipment >> Drivers Assistance Systems - ADAS >> Electronic Control Modules (Service Information) >> Module, Integrated Center Stack (ICSM) >> Removal And Installation >> Installation

Removal And Installation: Installation

  1. Position the ICS to the upper instrument panel center trim.
  2. Install the screws for the ICS to the upper instrument panel center trim and tighten securely.
  3. Connect the ICS wire harness connector.
  4. Connect the KIN wire harness connector.
  5. Install the ICS and upper instrument panel center trim.
  6. Connect the negative battery cable(s). Refer to STANDARD PROCEDURE .
scientia non olet · About Mike's Workshop Manuals