Description And Operation: Description
There are three Radio Receiver Modules (RRM) available in this vehicle, Uconnect® 3.0, Uconnect® 5.0 and Uconnect® 6.5. Each RRM has a distinct chassis design and is identified by a sales code. The Uconnect® 3.0 RRM (Sales Code RA1) includes the following features:
- AM/FM frequency reception
- dot - matrix, single DIN, monochromatic display
- six channel presets
- four speakers
- iPod integration
- Auxiliary/Universal Serial Bus (USB) Media Hub
- USB port in the center console (optional)
- vehicle personalization/settings
- speed adjusted volume
The Uconnect® 5.0 RRM (Sales Code RA2) includes the following features:
- AM/FM frequency reception
- 12.7 centimeter (5.0 inch) full color touchscreen display
- iPod integration
- Auxiliary/USB Media Hub
- USB port in the center console (optional)
- vehicle personalization/settings
- speed adjusted volume
- integrated steering wheel controls
- Radio Broadcast Data System (RBDS)
- Bluetooth® connectivity
- Bluetooth® streaming audio
- hands free phone
- Voice Recognition (VR) commands
- text message reader
- six speakers (optional)
- integrated Global Positioning System (GPS) navigation (optional)
- ParkView® integrated rear view camera (optional)
- Sirius XM satellite radio (optional)
The Uconnect® 6.5 RRM (Sales Code RA4) includes the following features:
- AM/FM frequency reception
- 16.5 centimeter (6.5 inch) full color touchscreen display
- iPod integration
- Auxiliary/USB Media Hub
- USB port in the center console (optional)
- vehicle personalization/settings
- speed adjusted volume
- integrated steering wheel controls
- Radio Broadcast Data System (RBDS)
- Bluetooth® connectivity
- Bluetooth® streaming audio
- hands free phone
- Voice Recognition (VR) commands
- text message reader
- nine speakers (optional)
- Premium integrated 3D Global Positioning System (GPS) navigation (optional)
- ParkView® integrated rear view camera (optional)
- Sirius XM satellite radio (1 - year subscription)
Hard wired circuitry connects the RRM to the electrical system of the vehicle. These hard wired circuits are integral to several wire harnesses, which routes throughout the vehicle and retained by many different methods. These circuits may be connected to each other and to the vehicle electrical system through the use of a combination of soldered splices, splice block connectors, and many different types of wire harness terminal connectors and insulators. Refer to the appropriate wiring information. The wiring information includes wiring diagrams, details of wire harness routing and retention, connector pin - out information and location views for the various wire harness connectors, splices and grounds. For proper wire repair, and connector repair procedures. Refer to STANDARD PROCEDURE , REMOVAL and INSTALLATION .
The RRM cannot be adjusted or repaired. If the RRM is damaged or ineffective, it must be replaced.