Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Jeep >> 2019 >> Renegade Trailhawk >> Repair and Diagnosis >> External Pages >> Different car >> Section 747 (Exhaust System) >> Sensor, Differential Pressure >> Installation

Sensor, Differential Pressure: Installation

WARNING: This page is about a different car, the 2018 Jeep Cherokee. However, it is still accessible from the selected car via links, so may be relevant.
GC0159583Courtesy of CHRYSLER GROUP, LLC
  1. Install the differential pressure sensor (2) and securely tighten the nut (1).
  2. Connect the differential pressure sensor vacuum hoses (4).
  3. Connect the differential pressure sensor wire harness connector (3).
  4. Install the engine cover.
  5. Connect the negative battery cable. If equipped with an Intelligent Battery Sensor (IBS), connect the IBS connector to the negative battery cable.
scientia non olet · About Mike's Workshop Manuals