Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Jeep >> 2019 >> Renegade Trailhawk >> Repair and Diagnosis >> External Pages >> Different car >> Section 730 (Fuel System) >> Fuel Injection, Diesel >> Sensor, Boost Pressure >> Removal

Sensor, Boost Pressure: Removal

WARNING: This page is about a different car, the 2018 Jeep Cherokee. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect and isolate the negative battery cable. If equipped with an Intelligent Battery Sensor (IBS), disconnect the IBS connector first before disconnecting the negative battery cable.
  2. Remove the engine cover.
    GC0147935Courtesy of CHRYSLER GROUP, LLC
  3. Disconnect the boost pressure sensor (2) wire harness connector (1).
  4. Remove the bolt (3) and the boost pressure sensor (2) from the intake manifold.
scientia non olet · About Mike's Workshop Manuals