Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Jeep >> 2019 >> Renegade Trailhawk >> Repair and Diagnosis >> External Pages >> Different car >> Section 136 (Electronic Control Modules (Service Information)) >> Module, Adaptive Cruise Control >> Removal And Installation >> Acc Bracket >> Removal - Bracket

Removal - Bracket

WARNING: This page is about a different car, the 2016 Jeep Renegade. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect and isolate the negative battery cable.
  2. Remove the front fascia. Refer to FASCIA, FRONT, REMOVAL AND INSTALLATION .
    Fig 1: Bracket & Rivets
    GC0165311Courtesy of CHRYSLER GROUP, LLC
  3. Using a drill, remove the rivets (1a) holding the bracket (1b) to cross (1c).
  4. Remove the bracket (1b).
scientia non olet · About Mike's Workshop Manuals