Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Jeep >> 2019 >> Renegade Trailhawk >> Repair and Diagnosis >> External Pages >> Different car >> Section 1334 (1.3L Ignition System) >> Spark Plug >> Removal And Installation >> Installation

Removal And Installation: Installation

WARNING: This page is about a different car, the 2020 Jeep Renegade. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the spark plug to the cylinder head and tighten to the proper specification. Refer to TORQUE SPECIFICATIONS  .
  2. Install the ignition coils. Refer to COIL, IGNITION, INSTALLATION  .
  3. Connect the negative battery cable.
scientia non olet · About Mike's Workshop Manuals