Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Jeep >> 2019 >> Grand Cherokee Trackhawk >> Repair and Diagnosis >> External Pages >> Different car >> Section 28 (Body - Interior/Exterior) >> DECKLID/Hatch/Liftgate/Tailgate/Swing Gate >> Panel, Trim >> Installation

Panel, Trim: Installation

WARNING: This page is about a different car, the 2018 Jeep Grand Cherokee. However, it is still accessible from the selected car via links, so may be relevant.
GC0145843Courtesy of CHRYSLER GROUP, LLC
  1. Position the upper trim panel (2), using hand pressure press firmly and evenly until the retaining clips are fully engaged.
  2. Install the flip glass weather strip.
    GC0145842Courtesy of CHRYSLER GROUP, LLC
  3. Connect the wire harness connectors to the tailgate lights.
  4. Position the lower trim panel (1), using hand pressure press firmly and evenly until the retaining clips are fully engaged.
  5. Connect the negative battery cable.
scientia non olet · About Mike's Workshop Manuals