Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Jeep >> 2019 >> Grand Cherokee Laredo, AWD, Automatic T/Case Control >> Repair and Diagnosis >> External Pages >> Different car >> Section 66 (Cooling System) >> Engine >> Heater, Engine Block >> Installation >> 3.6L

Heater, Engine Block: Installation: 3.6L

WARNING: This page is about a different car, the 2018 Jeep Grand Cherokee. However, it is still accessible from the selected car via links, so may be relevant.
GC0175258Courtesy of CHRYSLER GROUP, LLC
  1. Clean the engine block hole and heater seat.
  2. Install the engine block heater (1) and tighten the bolt (2) to 12 N.m (9 ft. lbs.).
    GC0175265Courtesy of CHRYSLER GROUP, LLC
  3. Connect the power cord plug (1) to the engine block heater.
  4. Install A/C compressor. Refer to COMPRESSOR, A/C, INSTALLATION .
scientia non olet · About Mike's Workshop Manuals