Sensor, Air Temperature, Intake: Installation: 6.2L
WARNING: This page is about a different car, the 2018 Jeep Grand Cherokee. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
Use care not to bend or damage the Inlet Air Temperature (IAT) sensor probe while installing.
 Courtesy of CHRYSLER GROUP, LLC
|
- Install the IAT sensor (1) into the rubber air intake hose, turn the IAT sensor 1/4 turn clockwise and lock into position.
 Courtesy of CHRYSLER GROUP, LLC
|
- Connect the IAT sensor wire harness connector (1).