Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Jeep >> 2019 >> Compass Trailhawk >> Repair and Diagnosis >> Engine Performance >> Ignition System (Service Information) >> Coil, Ignition >> Removal And Installation >> Removal And Installation - 1.4L >> Installation

Removal And Installation - 1.4L: Installation

  1. Place the ignition coils in their housings and tighten the screws to the proper specification. Refer to TECHNICAL SPECIFICATIONS .
  2. Connect the electrical connectors to the ignition coils.
  3. Install the engine cover. Refer to the appropriate Service Information .
  4. Connect the negative battery cable.
scientia non olet · About Mike's Workshop Manuals