Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Jeep >> 2018 >> Renegade Trailhawk >> Repair and Diagnosis >> External Pages >> Different car >> Section 862 (Power Windows (Service Information)) >> Switch, Power Window >> Installation

Switch, Power Window: Installation

WARNING: This page is about a different car, the 2018 Fiat 500L. However, it is still accessible from the selected car via links, so may be relevant.
GC0158920Courtesy of CHRYSLER GROUP, LLC
  1. Align the switch to the door bezel for installation.
  2. Connect the electrical harness connector (1) to the switch.
  3. Place the switch unit in its housing and engage the front retainers.
    GC0159055Courtesy of CHRYSLER GROUP, LLC
  4. Tighten the screw (1) and install the screw cover.
  5. Connect the negative battery cable.
scientia non olet · About Mike's Workshop Manuals