Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Jeep >> 2018 >> Renegade Trailhawk >> Repair and Diagnosis >> External Pages >> Different car >> Section 719 ((Radio Frequency Module (RF Hub) Electrical Diagnostics)) >> DTC Troubleshooting >> B215B-13-Ignition Run/Start 2 Control-Circuit Open >> Set Condition

Set Condition

WARNING: This page is about a different car, the 2018 Jeep Cherokee. However, it is still accessible from the selected car via links, so may be relevant.

Whenever the Radio Frequency Hub (RF Hub) senses an open on the F20 Ignition Run/Start Output circuit, this code will set.

NOTE:

This F20 circuit is a sense circuit from the Radio Frequency Hub to the Body Control Module. It has a maximum draw of 10mA.

scientia non olet · About Mike's Workshop Manuals