Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Jeep >> 2018 >> Renegade Trailhawk >> Repair and Diagnosis >> External Pages >> Different car >> Section 3 (Electronic Control Modules (Service Information)) >> Module, Radio Frequency (RF Hub) >> Removal And Installation >> Removal And Installation >> Removal

Removal And Installation: Removal

WARNING: This page is about a different car, the 2015 Jeep Renegade. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect and isolate the negative battery cable.
  2. Lower the top portion of the liftgate weatherstrip.
    Fig 1: Weatherstrip & Retainers
    GC0169263Courtesy of CHRYSLER GROUP, LLC
  3. With the proper tool, remove the retainers (2).
    Fig 2: RFH Module, Connectors & Nuts
    GC0168978Courtesy of CHRYSLER GROUP, LLC
  4. Slightly lower the rear of the headlining and disconnect the electrical connections of the RFHM.
  5. Remove the nuts (2a) and remove the RFHM (2b).
scientia non olet · About Mike's Workshop Manuals