Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Jeep >> 2018 >> Compass Trailhawk >> Repair and Diagnosis >> External Pages >> Different car >> Section 195 (Power Liftgate (Service Information)) >> Switch, Overhead Console >> Removal And Installation >> Removal

Removal And Installation: Removal

WARNING: This page is about a different car, the 2019 Jeep Compass. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect and isolate the battery negative cable.
    GC0179287Courtesy of CHRYSLER GROUP, LLC
  2. Using a suitable tool carefully disengage the retaining clips (3) on the side of the power lift gate switch (2).
  3. Disconnect the power liftgate switch wiring harness connector (1) and remove the switch (2).
scientia non olet · About Mike's Workshop Manuals