Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Jeep >> 2018 >> Cherokee Limited, 3.2L Eng VIN S, AWD, Automatic T/Case Control >> Repair and Diagnosis >> External Pages >> Different car >> Section 309 (Electronic Control Modules (Service Information)) >> Module, Transmission Control (TCM) >> Removal

Module, Transmission Control (TCM): Removal

WARNING: This page is about a different car, the 2018 Jeep Wrangler JK. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect and isolate the negative battery cable.
  2. Remove the knee bolster/steering column lower panel. Refer to COVER, STEERING COLUMN OPENING, REMOVAL .
    GC0173825Courtesy of CHRYSLER GROUP, LLC
  3. Disconnect the wiring harness connectors (2) from the Transmission Control Module (TCM) (1).
    GC0173824Courtesy of CHRYSLER GROUP, LLC
  4. Remove the fasteners (1) securing the TCM to the vehicle.
  5. Remove the TCM from the vehicle.
scientia non olet · About Mike's Workshop Manuals