Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Jeep >> 2018 >> Cherokee Limited, 3.2L Eng VIN S, AWD, Automatic T/Case Control >> Repair and Diagnosis >> External Pages >> Different car >> Section 309 (Electronic Control Modules (Service Information)) >> Module, Transmission Control (TCM) >> Installation

Module, Transmission Control (TCM): Installation

WARNING: This page is about a different car, the 2018 Jeep Wrangler JK. However, it is still accessible from the selected car via links, so may be relevant.
  1. Position the Transmission Control Module (TCM) to the vehicle for installation.
    GC0173824Courtesy of CHRYSLER GROUP, LLC
  2. Secure the TCM to the vehicle using two bolt fasteners (1).
    GC0173825Courtesy of CHRYSLER GROUP, LLC
  3. Connect the wiring harness connections (2) to the TCM (1).
  4. Install the knee bolster/steering column lower panel. Refer to COVER, STEERING COLUMN OPENING, INSTALLATION .
  5. Connect the negative battery cable.
  6. Perform the TCM adaptation relearn. Refer to MODULE, TRANSMISSION CONTROL (TCM), STANDARD PROCEDURE .
scientia non olet · About Mike's Workshop Manuals