Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Jeep >> 2018 >> Cherokee Limited, 3.2L Eng VIN S, AWD, Automatic T/Case Control >> Repair and Diagnosis >> External Pages >> Different car >> Section 309 (Electronic Control Modules (Service Information)) >> Module, Glow Plug >> Removal >> Right Hand Drive

Right Hand Drive

WARNING: This page is about a different car, the 2018 Jeep Wrangler JK. However, it is still accessible from the selected car via links, so may be relevant.
GC0130774Courtesy of CHRYSLER GROUP, LLC
NOTE:

The glow plug module (3) is located near the front of the battery (1).

  1. Disconnect the negative battery cable.
  2. Carefully remove mounting pin (2).
  3. Disconnect the wire harness connector (4) from the glow plug module.