Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Jeep >> 2018 >> Cherokee Limited, 3.2L Eng VIN S, AWD, Automatic T/Case Control >> Repair and Diagnosis >> External Pages >> Different car >> Section 309 (Electronic Control Modules (Service Information)) >> Module, Glow Plug >> Installation >> Right Hand Drive

Right Hand Drive

WARNING: This page is about a different car, the 2018 Jeep Wrangler JK. However, it is still accessible from the selected car via links, so may be relevant.
GC0130774Courtesy of CHRYSLER GROUP, LLC
NOTE:

The glow plug module (3) is located near the front of the battery (1).

  1. Connect the wire harness connector (4) to the glow plug module.
  2. Position the glow plug module (3) and install the mounting pin (2).
  3. Connect the negative battery cable.
scientia non olet · About Mike's Workshop Manuals