Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Jeep >> 2018 >> Cherokee Latitude Plus, 3.2L Eng VIN X, AWD, Automatic T/Case Control >> Repair and Diagnosis >> Accessories & Equipment >> Drivers Assistance Systems - ADAS >> Electronic Control Modules (Service Information) >> Module, Instrument Panel Cluster >> Installation >> Cluster Lens

Cluster Lens

GC0158370Courtesy of CHRYSLER GROUP, LLC
  1. Position the cluster lens (2), over the face of the instrument cluster (1).
  2. Press firmly and evenly on the lens, until each of the latches are fully engaged around the perimeter of the cluster housing.
  3. Install the instrument cluster into the instrument panel .
  4. Connect the negative battery cable. If equipped with an Intelligent Battery Sensor (IBS), connect the IBS connector to the negative battery cable.
scientia non olet · About Mike's Workshop Manuals