Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Jeep >> 2017 >> Wrangler Sahara, Automatic Trans >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Communication Devices >> Electronic Control Modules (Service Information) >> Module, Glow Plug >> Removal >> Right Hand Drive

Right Hand Drive

GC0130774Courtesy of CHRYSLER GROUP, LLC
NOTE:

The glow plug module (3) is located near the front of the battery (1).

  1. Disconnect the negative battery cable.
  2. Carefully remove mounting pin (2).
  3. Disconnect the wire harness connector (4) from the glow plug module.