Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Jeep >> 2017 >> Wrangler Rubicon, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 48 (Engine Cooling System) >> Engine >> Heater, Engine Block >> Removal >> 2.4L

Heater, Engine Block: Removal: 2.4L

WARNING: This page is about a different car, the 2017 Jeep Cherokee. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the engine cover.
    GC0156329Courtesy of CHRYSLER GROUP, LLC
  2. Unplug the power cord from block heater (1).
  3. Pull the tab (2) away from the cylinder block.
  4. Slide the block heater (3) to the right and out of the bore and remove it.
scientia non olet · About Mike's Workshop Manuals