Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Jeep >> 2017 >> Renegade Trailhawk >> Repair and Diagnosis >> External Pages >> Different car >> Section 260 (Exhaust System) >> Sensor, Exhaust Temperature >> Installation >> Exhaust Gas Temperature Sensor DPF 1/2

Exhaust Gas Temperature Sensor DPF 1/2

WARNING: This page is about a different car, the 2017 RAM ProMaster 3500, 2017 RAM ProMaster 2500, and 2017 RAM ProMaster 1500. However, it is still accessible from the selected car via links, so may be relevant.
GC0161879Courtesy of CHRYSLER GROUP, LLC
CAUTION:

The exhaust gas temperature sensor requires care when handling and installing. The exhaust gas temperature sensor is sensitive to knocks and bending. For this reason if the exhaust gas temperature sensor has been dropped, it must not be installed as damage to the sensor may have occurred. Do not remove from packaging until ready to install. Failure to follow these instructions may result in damage to the exhaust gas temperature sensor.

  1. Install the exhaust temperature sensor (1) and tighten to 45N.m (33 ft. lbs.).
    GC0161796Courtesy of CHRYSLER GROUP, LLC
  2. Connect the front exhaust temperature sensor wire harness connector (2).
  3. Connect the negative battery cable.
scientia non olet · About Mike's Workshop Manuals