Sensor, Differential Pressure: Installation
WARNING: This page is about a different car, the 2017 RAM ProMaster 3500, 2017 RAM ProMaster 2500, and 2017 RAM ProMaster 1500. However, it is still accessible from the selected car via links, so may be relevant.
- If remove, install the differential pressure sensor tubing (1). Tighten nut (2) to 9 N.m (80 in. lbs.).
- If removed, tighten the differential pressure sensor tube union nuts (1, 2) to 20 N.m (177 in. lbs.).
- Install the differential pressure sensor vacuum hoses (4).
- Install the differential pressure sensor (3). Tighten nut (1) 6 N.m 53 in. lbs.).
- Connect the differential pressure sensor wire harness connector (2).
- Connect the negative battery cable.