Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Jeep >> 2017 >> Renegade Trailhawk >> Repair and Diagnosis >> External Pages >> Different car >> Section 217 (Electronic Control Modules (Service Information)) >> Module, Tire Pressure Monitoring (TPM) >> Removal

Module, Tire Pressure Monitoring (TPM): Removal

WARNING: This page is about a different car, the 2017 RAM ProMaster 3500, 2017 RAM ProMaster 2500, and 2017 RAM ProMaster 1500. However, it is still accessible from the selected car via links, so may be relevant.
  1. Raise and support the vehicle. Refer to HOISTING, STANDARD PROCEDURE .
    GC0161895Courtesy of CHRYSLER GROUP, LLC
  2. Remove the two Tire Pressure Monitor (TPM) module nuts (1) and remove the TPM module (2).
  3. Disconnect the TPM module electrical connector.
scientia non olet · About Mike's Workshop Manuals