Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Jeep >> 2017 >> Renegade Limited, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 3 (Electronic Control Modules (Service Information)) >> Module, Radio Frequency (RF Hub) >> Removal And Installation >> Removal And Installation >> Installation

Removal And Installation: Installation

WARNING: This page is about a different car, the 2015 Jeep Renegade. However, it is still accessible from the selected car via links, so may be relevant.
  1. Check that the RFHM is not damaged.
  2. Place the RFHM to the vehicle and tighten the nuts.
  3. Connect the electrical connectors to the RFHM.
  4. Connect the negative battery cable.
  5. Connect the diagnostic scan tool and perform the learning procedure.
  6. Secure the headliner back in the installed position.
  7. Secure the tailgate weatherstripping.
scientia non olet · About Mike's Workshop Manuals