Module, Power Top Control, Full Open Retractable Roof (PTCM): Installation

Courtesy of CHRYSLER GROUP, LLC

1. Position the module (2) onto the power full open retractable roof assembly.
2. Install the two mounting screws (1).
3. Connect the electrical connectors (3).
4. Install the headliner. Refer to HEADLINER, INSTALLATION .
5. Connect the negative battery cable. If equipped with an Intelligent Battery Sensor (IBS), connect the IBS connector to the negative battery cable.
6. Re-initialize roof assembly. Refer to MODULE, POWER TOP CONTROL, FULL OPEN RETRACTABLE ROOF (PTCM), MODULE PROGRAMMING .