Link, Stabilizer Bar: Installation: Installation
WARNING: This page is about a different car, the 2012 Jeep Liberty. However, it is still accessible from the selected car via links, so may be relevant.
- Install the stabilizer link (1).
- Install the stabilizer link bolt at the stabilizer bar. Tighten the bolt to 115 N.m (85 ft.lbs.). with full vehicle weight.
- Install the stabilizer link bolt (2) at the lower control arm. Tighten the bolt (2) to 102 N.m (75 ft.lbs.). with full vehicle weight.
- Install the tire and wheel assembly. Refer to WHEELS, STANDARD PROCEDURE .