Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Jeep >> 2015 >> Compass Limited, AWD, Automatic CVT Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 245 (Power Transfer Unit (Service Information)) >> End Cover Seals >> Installation >> Installation

End Cover Seals: Installation: Installation

WARNING: This page is about a different car, the 2013 Jeep Patriot and 2013 Jeep Compass. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Install Carrier Cover Inner Seal
GC0084415Courtesy of CHRYSLER GROUP, LLC
  1. Install the inner seal into the PTU cover using Installer (special tool #9852, Installer, Seal) and Handle (special tool #C-4171, Driver Handle, Universal).
    Fig 2: Install Carrier Cover Outer Seal
    GC0084416Courtesy of CHRYSLER GROUP, LLC
  2. Install the outer seal into the PTU cover using Installer (special tool #9853, Installer, Seal) and Handle (special tool #C-4171, Driver Handle, Universal).
    Fig 3: Side Cover
    GC0084401Courtesy of CHRYSLER GROUP, LLC
  3. Install the side cover.
  4. Tighten side cover bolts (1) to 23 N.m (17 ft. lbs.).
  5. Install the right halfshaft. Refer to INSTALLATION .
scientia non olet · About Mike's Workshop Manuals