Module, Keyless Ignition Node: Installation: Installation

Fig 1: Wire Connector, Clips & KIN

Courtesy of CHRYSLER GROUP, LLC

1. Push the Keyless Ignition Node (KIN) (3) into the instrument panel until it snaps into place.
2. Reach through the Integrated Center Stack (ICS) screen opening and connect the KIN electrical connector (1).
   Fig 2: Center Bezel Retaining Clips

   Courtesy of CHRYSLER GROUP, LLC
3. Install the instrument cluster bezel (1). Refer to BEZEL, INSTRUMENT CLUSTER, INSTALLATION .
4. Connect the negative battery cable.