Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Jeep >> 2014 >> Compass Limited, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 5 (3.7L Engine (Service Information)) >> Engine Mounting >> INSULATOR, Engine Mount, Rear >> Removal >> Removal >> Notes

INSULATOR, Engine Mount, Rear: Removal: Removal: Notes

WARNING: This page is about a different car, the 2009 Jeep Liberty. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: A resilient rubber cushion supports the transmission at the rear between the transmission extension housing and the rear support crossmember or skid plate.
  1. Disconnect negative cable from battery.
  2. Raise the vehicle and support the transmission.
  3. Remove the nuts holding the support cushion to the crossmember. Remove the crossmember.
scientia non olet · About Mike's Workshop Manuals