Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Jeep >> 2014 >> Compass Limited, AWD, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 84 (Engine Cooling System) >> Engine >> Sensor, Coolant Temperature >> Removal >> Gas Engine >> Coolant Adapter Mounted

Coolant Adapter Mounted

WARNING: This page is about a different car, the 2012 Jeep Patriot and 2012 Jeep Compass. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: ECT - World Engine - Coolant Adapter
GC0083975Courtesy of CHRYSLER GROUP, LLC
1 - ETC
2 - COOLANT ADAPTER
  1. Disconnect negative battery cable.
  2. Partially drain cooling system below level of ECT Sensor (1). Refer to STANDARD PROCEDURE .
  3. Disconnect ECT Sensor electrical connector.
  4. Remove ECT Sensor (1) By pressing the locking tab down and turning the sensor counterclockwise.
scientia non olet · About Mike's Workshop Manuals