Gas Engine
WARNING: This page is about a different car, the 2012 Jeep Patriot and 2012 Jeep Compass. However, it is still accessible from the selected car via links, so may be relevant.
| 1 - MOUNTING BRACKET |
| 2 - BOLT |
| 3 - RADIATOR HOSE TEE |
| 4 - WASHER RESERVOIR |
| 5 - HOSE |
| 6 - COOLANT RECOVERY CONTAINER |
- Partially drain cooling system using the draincock only. Refer to STANDARD PROCEDURE . Drain system below level of the coolant recovery pressure container.
- Remove the return hose (5) from the upper radiator hose tee (3).
- Remove the coolant recovery bottle mount bolt (2) from the mounting bracket (1).
- Disengage the coolant recovery container (6) from the washer reservoir bottle (4).
- Remove the coolant recovery container (6).