Cylinder, Ignition Lock: Installation: Installation
WARNING: This page is about a different car, the 2012 Jeep Liberty. However, it is still accessible from the selected car via links, so may be relevant.
| 1 - KEY |
| 2 - KEY CYLINDER |
| 3 - RETAINING PIN HOLE |
The ignition key (1) must be in the key cylinder (2) for cylinder installation.
- Install the key cylinder into the housing using care to align the end of the key cylinder (2) with the ignition switch.
- Push the key cylinder (2) in until it clicks.
- Replace the upper and lower shrouds.
- Reconnect the battery.