Output Flange Seal: Installation: Installation

Fig 1: Seal Onto Installer

Courtesy of CHRYSLER GROUP, LLC

1. Place the seal on the installer.
   Fig 2: Installing Pinion Side Seal

   Courtesy of CHRYSLER GROUP, LLC
2. Install the pinion side seal using Installer (special tool #9893, Installer, Seal) and Handle (special tool #C-4171, Driver Handle, Universal).
3. Install right side halfshaft. Refer to INSTALLATION .
   Fig 3: Seal Onto Installer

   Courtesy of CHRYSLER GROUP, LLC
4. Place the seal on the installer.
   Fig 4: Installing Ring Gear Side Seal

   Courtesy of CHRYSLER GROUP, LLC
5. Install the ring gear side seal using Installer (special tool #9893, Installer, Seal) and Handle (special tool #C-4171, Driver Handle, Universal).
6. Install left side halfshaft. Refer to INSTALLATION .
7. Fill RDA as needed. Refer to STANDARD PROCEDURE .
8. Lower vehicle and road test.