Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Jeep >> 2014 >> Compass Limited, AWD, Automatic CVT Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 83 (Fuel System) >> Fuel Delivery, Diesel >> Regulator, Fuel Pressure >> Installation >> Installation

Regulator, Fuel Pressure: Installation: Installation

WARNING: This page is about a different car, the 2012 Jeep Patriot and 2012 Jeep Compass. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Fuel Rail Pressure Sensor Harness Connector
GC0138069Courtesy of CHRYSLER GROUP, LLC
  1. Install the fuel rail pressure sensor (2) onto fuel rail (3). Tighten to 35 N.m (26 ft. lbs.).
  2. Connect the fuel rail pressure sensor harness connector (1).
  3. Connect the negative battery cable.
scientia non olet · About Mike's Workshop Manuals