Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Jeep >> 2014 >> Compass Limited, AWD, Automatic CVT Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 111 (Power Transfer Unit (Service Information)) >> Shield, Extension Housing Dust >> Installation >> Installation

Shield, Extension Housing Dust: Installation: Installation

WARNING: This page is about a different car, the 2012 Jeep Patriot and 2012 Jeep Compass. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Wood, Dust Shield & Extension Housing
GC0084423Courtesy of CHRYSLER GROUP, LLC
  1. Using a block of wood (2) install the dust shield (3) onto the extension housing (1).
    Fig 2: Extension And Pinion Housing Bolts
    GC0084387Courtesy of CHRYSLER GROUP, LLC
  2. Install the extension housing and bolts.
  3. Tighten the extension housing bolts to 38 N.m (28 ft. lbs.).
  4. Install the propeller shaft. Refer to INSTALLATION .
scientia non olet · About Mike's Workshop Manuals